Polysteel Rope
| Size (Diameter) | Approx. Weight of 1200 ft. Coil | Tensile Strength | |
|---|---|---|---|
| mm | mm | (Lbs) | (Lbs) |
| 6 | 1/4" | 18 | 1,650 |
| 8 | 5/16" | 24 | 2,820 |
| 10 | 3/8" | 37 | 3,700 |
| 11 | 7/16" | 47 | 4400 |
| 12 | 1/2" | 62 | 5,100 |
| 14 | 9/16" | 77 | 8,360 |
| 16 | 5/8" | 96 | 10,640 |
| 18 | 3/4" | 138 | 13570 |
| 22 | 7/8" | 180 | 18,780 |
| 24 | 1" | 220 | 21,730 |
| 28 | 1-1/8" | 293 | 29,000 |
| 30 | 1-1/4" | 337 | 33,050 |
| 36 | 1-1/2" | 476 | 47,560 |
| 40 | 1-5/5" | 586 | 58,910 |
| 44 | 1-3/4" | 680 | 68,000 |
| 48 | 2" | 790 | 78,000 |
Tensile Strengths are averages for new ropes tested under laboratory conditions and may vary by 10%. Weights are average and may vary by 5%. Polypropylene specifications are based on the closest equivalent Canadian Standards (40-GP-13M)
Polysteel rope is made from filaments, which are extruded on a state of the art computerized production line which monitors all aspects of the manufacturing process to extremely tight tolerances. This results in a fiber, which has a minimum tenacity of 7.5 grams per denier, the highest grams per denier of any fiber commonly used in the manufacturing of polypropylene or polyethylene rope.
Polysteel is the strongest synthetic rope in its class because of our extremely tight tolerances from fiber extrusion to the finished rope. The result is a rope of unsurpassed quality and consistency. It is Polysteel’s unique characteristics, which make it a hands down choice for an industry that demands a highly superior product.
- Approximately 40% stronger than polypropylene / polyethylene
- 18% elongation at break
- Excellent UV protection
- Superior abrasion resistance
- No loss of strength when wet
- Stores wet
- Resists rot and mildew
- Available in a variety of colors
- Custom length and markings also available
